CAEPIPE Installation

This page is exclusively for installing a fully licensed copy of CAEPIPE NOT CAEPIPE Evaluation nor CAEPIPE LM.

UPGRADE LICENSEES: IF you already have an older version of CAEPIPE (v5.12 or later) working on a PC, you need not perform the "4. Click on Step 1: Install Driver..." below. But if you are installing on a different PC (that did not have CAEPIPE working on it) OR have an older than v5.12 CAEPIPE version working on the target PC, you need to follow all the steps below. Be sure to accept "upgrading" your driver software when you get to item 4.

NEW LICENSEES: Please follow all steps outlined below.

Stand Alone License Installation (USB Hardware key has "SuperPro" on it)

1. Insert your CAEPIPE CD into your computer.

2. A menu should appear automatically. If it does not navigate to
(CD-ROM drive letter):\CAEPIPE\Autorun.exe and double-click on "Autorun.exe".

3. Navigate the menu to the CAEPIPE section.

4. Click on Step 1: Install Driver and follow all instructions to complete the installation of the hardware key driver.

5. Insert your hardware key into the LPT/USB port.

6. Click on Step 2: Install CAEPIPE and follow all instructions to complete the installation of the CAEPIPE.

CAEPIPE should now be fully installed and operational. If you are experiencing any trouble, see our CAEPIPE Troubleshooting page.

Network License Installation (USB Hardware key has "SuperProNet" on it)

The installation of a network version of CAEPIPE is similar to a stand alone. The difference is that the hardware key can reside on a different computer then that which uses CAEPIPE.

The Server is the computer the hardware key resides on.

The Client is the computer which uses CAEPIPE.

SERVER INSTALLATION:

1. Insert your CAEPIPE CD into your computer.

2. A menu should appear automatically. If it does not navigate to
(CD-ROM driver letter):\CAEPIPE\Autorun.exe and double-click on "Autorun.exe".

3. Now you should see the main installation menu for CAEPIPE.

4. Click on Step 1: Install Driver to begin the installation and follow all instructions to complete installation of the hardware key driver.

5. Insert your hardware key into the LPT/USB port.

6. Configure your firewall to allow all In-Bound and Out-Bound network traffic on UDP Port 6001. Read SuperProNet Firewall Configuration for more details.

CLIENT INSTALLATION:

1. Insert your CAEPIPE CD into your computer.

2. A menu should appear automatically. If it does not navigate to
(CD-ROM drive letter):\CAEPIPE\Autorun.exe and double-click on "Autorun.exe".

3. Navigate the menu to the CAEPIPE section.

4. ONLY IF SERVER and CLIENT are the same computer: Click on Step 1: Install Driver and follow all instructions to complete the installation of the hardware key driver. IF SERVER AND CLIENT ARE DIFFERENT: You do NOT need to perform this Step 1 on the client machine.

5. Click on Step 2: Install CAEPIPE and follow all instructions to complete the installation of the CAEPIPE.

6. Follow the instructions on the NSP_HOST Configuration page.

CAEPIPE should now be fully installed and operational. If you are experiencing any trouble, see our CAEPIPE Troubleshooting page.

ME&S Upgrade

Note: You must be a valid ME&S user to obtain an upgrade setup file.

1. Go To the ME&S Users page.

2. Fill out your name, email, and serial #.

3. Click on Get File and download your setup file.

4. Double-click on "kpsetup_XXXXX.exe" and follow the instructions to complete your upgrade of CAEPIPE.